IB Statements/sts

From CometWiki

(Difference between revisions)
Jump to: navigation, search
Line 6: Line 6:
  Return values:  Console/terminals:  
  Return values:  Console/terminals:  
-
Byte Description Values  
+
Byte Description Values  
  1 Device type 0 = disk file
  1 Device type 0 = disk file
-
2 = terminal  
+
2 = terminal  
-
2 Terminal status 0 = inoperative
+
2 Terminal status 0 = inoperative
  1 = operative  
  1 = operative  
  3 Read request status 0 = not pending
  3 Read request status 0 = not pending
-
1 = pending  
+
1 = pending  
  4 F2 status 0 = off
  4 F2 status 0 = off
  1 = on  
  1 = on  

Revision as of 12:50, 22 May 2009

STS function

Syntax: STS(lun)

Discussion: The STS function returns the operating status of the specified logical unit number.

Return values:  Console/terminals: 

Byte Description Values

1 Device type 0 = disk file

2 = terminal 2 Terminal status 0 = inoperative

1 = operative 
3 Read request status 0 = not pending

1 = pending

4 F2 status 0 = off
1 = on 
5 Slave printer status 0 = inoperative
1 = operative 
6 Terminal type 1 = VT3
6 = VT6 
7 Characters per line 0 = 64 characters per line
1 = 80 or 132 characters per line 
8 Key that caused transmit hex encoded (see INPUT and (Easy Scan) 
9-10 Location of the cursor when the transmit occurred hex encoded (see INPUT)  
11-14 The handle of the window that generated the read see (CreateWindowEx) and (SelectWindowEx) 
15-16 Location of the cursor when the mouse was clicked hex encoded (see Easy Scan) 
17 COSW major version number see example 2 below 
18 COSW minor version number see example 2 below 


For devices that previously did not return STS (e.g., spoolers):

Byte(s) Description 
1-3 Device name 
4 type information stored in cfg file by SYSGEN 
5+ device-specific information 


Also see STS (Winsock gateway).

History: Bytes 8, 9, and 10 were added to the STS function in Comet version 504.208 in order to enhance the INPUT statement and as part of the (Easy Scan) mnemonic. Bytes 11 through 14 were added in Comet2002 Build 306.


Example 1:

 F2FLAG$ = SUB(STS(0),4,1)          ! Get F2 status byte
 IF F2FLAG$ = "1" THEN GOTO BOTTOM

This example shows how to test for the F2 key. First, the STS function is executed for logical unit number 0, the controlling terminal. The fourth byte of the return value is the F2 status byte -- this is derived with the SUB function. If this byte equals "1" -- indicating that F2 is on -- the program branches to statement label BOTTOM. Example 2:  ! Byte 17 of STS(0) now returns the COSW major version number, and ! byte 18 of STS(0) now returns the COSW minor version number.

! COSW Version check Work$ = Sts(0) CoswMajVer = Asc(Sub(Work$, 17, 1)) CoswMinVer = Asc(Sub(Work$, 18, 1))

If (CoswMinVer < 19)

 Print "This program uses features that require COSW version 2.19 (Comet build 309) or later."
 Goto Progend

EndIf


Example 3: Open (LUN) 'sp1' Jobname$ = sub(sts(lun),5,8) + '.' + sub(sts(lun),1,3)

This example shows how to retrieve the spool job name. The STS function returns the spool name in the first 3 bytes and the spool job number (of the current job) in bytes 5 through 13. To get the full file name you must concatenate these values and add the "." between job number and the spool name.

Personal tools