Comet Error Codes
From CometWiki
Comet Exception Messages
(QERCOMET file)
EXCP Meaning ================================================================= 00 No Exception Reported 01 Not in Current Use 02 End of File 03 Unable to Allocate Space for File 04 Keyed File Write Without Index 05 Create Without Directory Label 06 Directory Not Found on ACCESS 07 File Unavailable--Lock/Unlock Error 08 Not in Current Use 09 Not in Current Use 10 Not in Current Use 11 File Not Found 12 File Already Exists 13 Text file exists on CREATE 14 Not in Current Use 15 Not in Current Use 16 Not in Current Use 17 Not in Current Use 18 Not in Current Use 19 Not in Current Use 20 Not in Current Use 21 Not in Current Use 22 Not in Current Use 23 Not in Current Use 24 Unable to Rename Disk to Disk 25 Invalid DOS Call 26 Invalid Message Call 27 DOS Returned an Error 28 Invalid Priority Call 29 Not in Current Use 30 Device Inoperative 31 Device or Directory Unavailable 32 Key Not Found 33 Record Unavailable--Extract Error 34 Logical Unit # Unavailable for Open 35 File Not Open for Read or Write 36 Can't Perform Function on Open File 37 Not in Current Use 38 Device or Target File System Unable to Perform Function 39 Not in Current Use 3D KDOS Function Error 40 Invalid Window Specified 41 Edit Mask Length Incorrect 42 Not in Current Use 43 Not in Current Use 44 I/O Buffer Overflow 45 Invalid Parameter 46 Non-Numeric Input in a Numeric Field 47 Parameter Too Large 48 Invalid Key or Record Size: CREATE 49 Invalid Logical Unit Number 50 Array Subscript Out of Range 51 Not in Current Use 52 Not in Current Use 53 Invalid File Access 54 Invalid Function for Named File 55 Not in Current Use 56 Record Already Exists for INSERT 59 Not in Current Use 60 Cannot IPL while other Users Active 61 Program Not Found 62 Not in Current Use 63 Cannot Run Non-Object File 64 Invalid Partition Name 65 Partition Busy, Program Running 66 Performed an EXIT when ENTERLEVEL value was 0 67 Partition Busy, Normal Termination 68 Terminate Complete, Task Wasn't Idle 69 Activate Unsuccessful/Task had Error Pending 70 ESCAPETO/SUB not active for INTERRUPT 71 DOS Failed to Transfer Read Data 72 IRQ 3 Failure from Comet Board 73 Illegal Jump to Location Zero 74 Not in Current Use 75 Resources Left Allocated After Call 76 File Size Limit Reached in Demo Mode 77 Attempted Write with Zero Length 78 Error Performing ENTER/EXIT Program 79 Key Block Offset Too Large 7A Attempt to EXTRACT Keyed Only File 7B Maximum File Size Exceeded 80 Maximum I/O Buffer Size Exceeded 81 Spool File Error 82 Top Key Sector not in Delete Stack 83 DOS Disc Error 84 Key Sector Search Level Impossible 85 ES NOT POINTING TO DATA_SEG IN DOS CALL 86 File Descriptor List Overflow 87 Unexpected EOF from DOS 88 Keys but NO Records in File 89 Unsupported Reference 8A Network Buffer Overflow 8E Node Lock Timed Out 90 Disk Full -- DOS Wrote Less Than Expected 91 Invalid/Unsupported System Call 92 GOSUB Stack Underflow 93 GOSUB Stack Overflow 94 Directory Entry Unavailable / CLOSE 95 Next Key Unavailable for Deletion 96 New Key Found during INSERT 97 New First Key found during INSERT 98 Extracted Record not found in Table 99 Error Received from DOS
Internet Basic Compiler Error Messages
Number Error Message =================================================================== 00 System error - Reload and restart 01 Missing keyword, punctuation 02 Cannot redefine symbolic constant at execution time 03 Variable referenced is incorrect type or undefined 04 Variable has been previously defined 05 Out of range parameter (constant) 06 Array too large (9999 bytes maximum) 07 Unnecessary characters following a statement 08 Statement number previously declared 09 Invalid syntax for hex field 10 Non-numeric FOR/NEXT parameter 11 Invalid loop statement 12 Invalid string constant termination 13 Nested FOR/NEXT loop using same control variable 14 Invalid conditional statement 15 FOR/NEXT nesting error 16 No matching FOR statement 17 Statement number required 18 FORMAT number not declared 19 Argument/subscript error 20 Incorrect number of expression operands 21 Precision will overflow accumulator 22 No path to this statement 23 No space to evaluate expression 24 Precision conflict (FOR/NEXT) 25 We've only got one string accumulator 26 String length not declared 27 BREAK or CONTINUE found, no FOR/DO 28 Integer out of range 29 Operand/operator type disagreement 30 Unbalanced parentheses 31 Numeric expression required 32 Logical expression required 33 Expression operator not allowed 34 No DO loop conditional clause 35 String expression required 36 Fraction, where integer required 37 Integer/symbolic constant required 38 -reserved for future use- 39 Invalid usefile parameter 40 LOOP statement has no preceding "DO" 41 SELECT/CASE sequence error 42 CASE: "FROM" with no "TO" or "THRU" 43 "CASE ELSE" no last "CASE" 44 MTB51 read\write error 45 .ELSE without .IF 46 Unrecognizable compiler directive 47 - reserved - 48 - reserved - 49 - reserved - 50 - reserved - 51 Program exceeds 64K
Windows Sockets Error Codes, Values, and Meanings Last reviewed: November 17, 1997 Article ID: Q150537 The information in this article applies to: Microsoft Windows NT Workstation versions 3.5 and 3.51 Microsoft Windows NT Server versions 3.5 and 3.51 Microsoft LAN Manager version 2.2c Microsoft TCP/IP-32 for Windows for Workgroups, versions 3.11, 3.11a, and 3.11b Microsoft Windows 95 Microsoft Network Client version 3.0 for MS-DOS
SUMMARY
This article describes the Windows Sockets error codes.
MORE INFORMATION The following table is a list of possible error codes returned by the WSAGetLastError() call, along with their explanations.
Windows Sockets code Error Description
------------------------------------------------------------------------
WSAEINTR 10004 Interrupted system call.
WSAEBADF 10009 Bad file number.
WSEACCES 10013 Permission denied.
WSAEFAULT 10014 Bad address.
WSAEINVAL 10022 Invalid argument.
WSAEMFILE 10024 Too many open files.
WSAEWOULDBLOCK 10035 Operation would block.
WSAEINPROGRESS 10036 Operation now in progress. This error is
returned if any Windows Sockets API
function is called while a blocking
function is in progress.
WSAEALREADY 10037 Operation already in progress.
WSAENOTSOCK 10038 Socket operation on nonsocket.
WSAEDESTADDRREQ 10039 Destination address required.
WSAEMSGSIZE 10040 Message too long.
WSAEPROTOTYPE 10041 Protocol wrong type for socket.
WSAENOPROTOOPT 10042 Protocol not available.
WSAEPROTONOSUPPORT 10043 Protocol not supported.
WSAESOCKTNOSUPPORT 10044 Socket type not supported.
WSAEOPNOTSUPP 10045 Operation not supported on socket.
WSAEPFNOSUPPORT 10046 Protocol family not supported.
WSAEAFNOSUPPORT 10047 Address family not supported by protocol
family.
WSAEADDRINUSE 10048 Address already in use.
WSAEADDRNOTAVAIL 10049 Cannot assign requested address.
WSAENETDOWN 10050 Network is down. This error may be
reported at any time if the Windows
Sockets implementation detects an
underlying failure.
WSAENETUNREACH 10051 Network is unreachable.
WSAENETRESET 10052 Network dropped connection on reset.
WSAECONNABORTED 10053 Software caused connection abort.
WSAECONNRESET 10054 Connection reset by peer.
WSAENOBUFS 10055 No buffer space available.
WSAEISCONN 10056 Socket is already connected.
WSAENOTCONN 10057 Socket is not connected.
WSAESHUTDOWN 10058 Cannot send after socket shutdown.
WSAETOOMANYREFS 10059 Too many references: cannot splice.
WSAETIMEDOUT 10060 Connection timed out.
WSAECONNREFUSED 10061 Connection refused.
WSAELOOP 10062 Too many levels of symbolic links.
WSAENAMETOOLONG 10063 File name too long.
WSAEHOSTDOWN 10064 Host is down.
WSAEHOSTUNREACH 10065 No route to host.
WSASYSNOTREADY 10091 Returned by WSAStartup(), indicating that
the network subsystem is unusable.
WSAVERNOTSUPPORTED 10092 Returned by WSAStartup(), indicating that
the Windows Sockets DLL cannot support
this application.
WSANOTINITIALISED 10093 Winsock not initialized. This message is
returned by any function except
WSAStartup(), indicating that a
successful WSAStartup() has not yet been
performed.
WSAEDISCON 10101 Disconnect.
WSAHOST_NOT_FOUND 11001 Host not found. This message indicates
that the key (name, address, and so on)
was not found.
WSATRY_AGAIN 11002 Nonauthoritative host not found. This
error may suggest that the name service
itself is not functioning.
WSANO_RECOVERY 11003 Nonrecoverable error. This error may
suggest that the name service itself is
not functioning.
WSANO_DATA 11004 Valid name, no data record of requested
type. This error indicates that the key
(name, address, and so on) was not found.
NOTE: This table does not include all of the error codes defined in
Winsock.h.
